Industry challenges when ensuring accuracy in temperature monitoring

  • Are all digital thermometers and probes operating within permitted tolerances?
  • Where there is accuracy drift, is it instrument or probe?
  • What method of in-house calibration is most appropriate and cost effective?
  • Do you have the time to regularly check each instrument?

Consider these two manual methods of temperature monitoring:

Ice and boiling water

  • Ice not always readily available
  • Consistent preparation needed to achieve meaningful results
  • Any remaining air spaces distort calibration readings
  • Not practical to immerse in boiling water – Health & Safety issues
  • Falling temperatures requires additional reference thermometer

Test caps

  • Quick to use
  • No validation of associated temperature probe
  • Not suitable for validating fixed or integral probes
  • Only check to one temperature value
  • Require multiple certification with multiple cost

The LazaPort Range

LazaPort calibrators provide assurances that are traceable to UKAS and verifies accuracy of a complete unit – both thermometer and probe. They are stable and consistent (±0.2°C) to two temperature points and are able to check multiple numbers simultaneously with no preparation time delays. Significantly increase the speed and accuracy of your testing procedures, saving time and substantial cost savings 

LazaPort 12

The LazaPort 12 Probe Calibrator is a heat source calibration verifier for up to 12 thermometers and probes simultaneously, with provision for checking infrared thermometers to 2 temperature points.

It provides the fastest, most cost-effective method of checking thermometer and probe together where there are large numbers of instruments to be checked on a regular basis.

Key Features

  • Verifies thermometer and probe together
  • No preparation time delays
  • Accurate and stable (±0.2°C)
  • Facilitates regular accuracy verification
  • Optional UKAS certification
  • Provides full traceability
  • Promotes awareness in monitoring
  • Saves valuable time – how many minutes per day or week does this instrument need to save you to pay for itself?
  • CE Approved

LazaPort 4

The LazaPort 4 Probe Calibrator quickly investigates accuracy of the complete probe thermometer unit at either 0°C/100°C or -18°C/100°C and checks up to four sets simultaneously.

The demands of compliance and auditing require food processors to check the accuracy of thermometers and probes on an increasingly frequent basis – monthly, weekly or even daily. LazaPort4 calibrators significantly increase the speed and accuracy of your testing procedures, saving time and money whilst helping you meet compliance requirements.

Key features

  • Verifies thermometer and probe together
  • No preparation time delays*
  • Accurate and stable (±0.2°C)
  • Facilitates regular accuracy verification
  • Optional UKAS certification
  • Provides full traceability
  • Visual reference temperatures
  • Promotes awareness in monitoring
  • Compact and easily transported
  • CE Approved

*Can be left unattended whilst stabilising. Requires 15 minutes.

Are your thermometers compatible with a LazaPort?

LazaPort calibrators are compatible with most makes and models of thermometer – simply confirm your probe shape and dimensions with a member of the Klipspringer team by completing the form below.

Contact Us

For more information about LazaPorts or to check your thermometers are compatible, please fill in the contact form below.


*
*
* Please enter an email address
*